TOUGHENED GLASS
All the glass used in these vivariums is toughened to BS6206A kite marked standards. This means it has up to 5 times its original strength, and if broken, the glass breaks into small blunt fragments. Normal plate glass, if damaged, breaks into sharp long shards. As the glass is used as sliding glass doors it is crucial that only safety glass is used to prevent serious injury.

VENTILATION
Each vivarium contains the correct number of vents to provide optimum temperature and humidity levels. 65mm diameter circular vents are positioned at both the top and bottom of the back panel allowing a steady flow of air throughout the vivarium. Each vent contains a plentiful number of holes which are big enough to allow air to flow in and out, but small enough to prevent live foods from escaping.

FOREST STEWARDSHIP COUNCIL
All timber comes from recycled sources or FSC sustainable forests. The FSC product label allows consumers worldwide to recognise products that support the growth of responsible forest management worldwide. Environmentally appropriate forest management ensures that the harvest of timber and non-timber products maintains the forest's biodiversity, productivity and ecological processes.

EASY TO ASSEMBLE
Improved the self assembly construction. All units have fewer parts and nearly 50% less assembly fittings. This means that assembly should take half the time and go together first time.

CABLE ACCESS POINTS
Outlet points have been formed in the back panel for cable management. Any size of plug or fitting can easily pass through prior to securing the lid. To remove cables or replace, simply loosen the cams and lift the lid. Cable access points are located at each end, along the top. Either point can easily be closed with silicon if not required.

SEALING YOUR VIVARIUM
Although the melamine itself is waterproof, the exposed chipboard may swell if water is absorbed. We therefore recommend that you seal your vivarium with silicon once constructed to prevent leakage and to help ensure that your product has a long and healthy life. This will make your vivarium completely waterproof. Simply run silicon along all inside joins and areas of exposed chipboard (such as cam holes) and leave overnight to dry. We also suggest that a small amount of silicon is run internally around the edge of the vent holes and tracking to help ensure that no moisture will enter the chipboard. It is critical that all joins and areas of exposed chipboard are cleaned before sealing.

TWO YEAR WARRANTY
All these vivariums have a standard 12 month warranty. If you fill out the warranty card provided along with the vivarium, you will receive an extra 12 months free, giving you a total of 2 years warranty from the date of purchase. The standard and extended warranty covers for defective parts which have failed under normal use. We shall not replace parts that have been damaged under abnormal conditions or that which have been subjected to improper use. Please also note, it is important that you seal your vivarium to prevent moisuture entering into the exposed chipboard. We will not replace parts that have been water damaged due to insufficient sealing. If the vivarium is not sealed correctly this will invalidate the warranty.